This item is not available for sale.

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

ADOPTED_FROM:EN 13480-6:2012 This European Standard specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of EN 13480. Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition should be made at a closing element e.g. an isolating or regulating valve separating the two sections. This should be close to the boundary of the industrial site, but may be inside or outside the boundary. Operating temperature up to 75 °C. NOTE For higher temperatures reference should be made to EN 13941, but it should be kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.
 

Document History

  1. NS-EN 13480-6:2017


    Metallic industrial piping - Part 6: Additional requirements for buried piping

    • Most Recent
  2. NS-EN 13480-6:2012/A1:2016


    Metallic industrial piping — Part 6: Additional requirements for buried piping

    • Historical Version
  3. NS-EN 13480-6:2012

    👀currently
    viewing


    Metallic industrial piping — Part 6: Additional requirements for buried piping

    • Historical Version
  4. NS-EN 13480-6:2004/A1:2005


    Metallic industrial piping — Part 6: Additional requirements for buried piping

    • Historical Version
  5. NS-EN 13480-6:2004


    Metallic industrial piping — Part 6: Additional requirements for buried piping

    • Historical Version
  6. NS 5598:1977


    Butt welding fittings, bent saddle joints, nominal pressure 16

    • Historical Version
  7. NS 5595:1977


    Butt welding fittings, reducers

    • Historical Version
  8. NS 5594:1977


    Butt welding fittings, pipe tees

    • Historical Version
  9. NS 5596:1977


    Butt welding fittings, caps

    • Historical Version
  10. NS 5597:1977


    Butt welding fittings, saddle joints, nominal pressure 16

    • Historical Version
  11. NS 5593:1976


    Steel tubes — Buttwelding bends — Type 5d, 45, 90 and 180 degrees

    • Historical Version
  12. NS 5592:1976


    Buttwelding bends — Type 3d, 45, 90 and 180 degrees

    • Historical Version
  13. NS 989:1965


    Sveisebend for stålrør — 90º og 180º

    • Historical Version
 

Amendments, rulings, supplements, and errata

  1. NS-EN 13480-6:2012/A1:2016


    Metallic industrial piping — Part 6: Additional requirements for buried piping