BS EN 16896:2016 specifies a procedure for the determination of kinematic viscosity (v) at 40 °C in the range from 2 mm²/s to 6 mm²/s by calculation from dynamic viscosity (η) and density (ρ) of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures of these using the Stabingertype viscosimeter.

The result obtained using the procedure described in this standard depends on the behaviour of the sample. This European Standard should be used predominantly on liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). However, if the viscosity changes significantly with the shear rate, comparison with other measuring methods is only permissible at similar shear rates.

WARNING - The use of this Standard can involve hazardous materials, operations and equipment. This Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to the application of the Standard, and fulfil statutory and regulatory requirements for this purpose.


Cross References:
EN ISO 3104
ISO 3104
EN ISO 3170
ISO 3170
EN ISO 3171
ISO 3171
EN ISO 12185
ISO 12185
RRT 2013-445
EN ISO 4259
ISO 4259


All current amendments available at time of purchase are included with the purchase of this document.