BS EN 14033-2:2017 defines the specific technical railway requirements for travelling and working with machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment as specified in EN 14033-1.

This European Standard applies to all railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilizing adhesion between the rail and rail wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.

This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex M.

This European Standard is applicable to 1 435 mm nominal track gauge. Some requirements may be applicable for working on infrastructures with nominal narrow track gauge or nominal broad track gauge lines, tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures.

This European Standard covers the safety requirements for the railway specific problems for travelling and working on different infrastructures. The application of these requirements is the object of a verification procedure, which does not form part of this European Standard, but an Annex I is included for information. In all cases an authorization to work is needed to access the infrastructure.

This European Standard is also applicable for machines that in working position are partly supported on the ballast or the formation.


Cross References:
EN 12077-2:1998
ISO 7731:2003 (R09) Ed 2
EN 15273-2:2013+A1:2016
EN 12999:2011
EN 50153:2014
EN 13977:2011
EN 45545-2:2013+A1:2015
EN 14363:2016
ISO 4310:2009
EN 15877-1:2012
EN ISO 7731:2008 (ISO 7731:2003) AS
ISO 4305:2014
EN 45545-1:2013
ISO 7010:2011 Ed 2
EN 14033-3:2017
EN ISO 7010:2012/A7:2017
EN 14033-1:2017
EN 1991-2:2003
EN 50121-3-2:2016
ISO 16754:2008 Ed 1
EN 50317:2012
EN 15954-2:2013
EN 280:2013 EN 15954-1:2013
EN 13848-3:2009
EN 15955-1:2013
EN 15955-2:2013


All current amendments available at time of purchase are included with the purchase of this document.