BS EN 14033-1:2017 defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment. Special national conditions applicable to specific member states are shown in Annex B.

This European Standard applies to all railbound machines and other vehicles - referred to as machines - running exclusively on the railway (utilizing adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment.

This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex I.

This European Standard is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, urban railways, railways utilizing other than adhesion between the rail and wheels and road-rail machines which are not included in this standard.

This European Standard covers the railway specific requirements for movements of the machine as a train and movements to reach work sites.


Cross References:
EN 14198:2016
EN 15663:2017
EN 12663-2:2010
EN 15313:2016
EN 14033-3:2017
EN 15624:2008
EN 15877-2:2013
EN 14535-2:2011
EN 13749:2011
EN ISO/IEC 17025 (ISO/IEC 17025:2005) AS
EN 12663-1:2010+A1:2014
EN 15437-1:2009
EN 13260:2009
EN 50121-3-2:2016
EN 15153-2:2013
EN 50125-1:2014
EN 15273-2:2013
EN 14363:2016
EN 50121-3-1:2017
EN 14531-1:2015
EN 62625-1:2013
EN ISO 7010:2012
EN 50238-1:2003
EN 14531-2:2015
BS EN 286-4:1995
EN 14033-2:2017
EN 50153:2014
EN 15273-1:2013
ISO 8573-1:2010
EN 13979-1:2003
EN 13261:2009
EN 15566:2016
EN 15625:2008
ISO 11112:1995 (R05)
EN 14535-1:2005
EN 10220:2002
ISO/IEC 17025:2005 Ed 1
EN 45545-2:2013+A1:2015
ISO 7010:2011 Ed 2
EN 15612:2008
EN 13104:2009
EN 15227:2008+A1:2010
EN 14067-4:2013
EN 12080:1998
EN 15329:2015
EN 15153-1:2013+A1:2016
EN 16116-2:2013
EN 15528:2015
EN 15551:2017
EN 10305-4:2016
EN 16404:2016
EN 15179:2007
EN 10305-6:2016
EN 14067-6:2010
EN 15152:2007
EN 15595:2009+A1:2011
EN 15355:2008
EN 15220:2016
EN 15611:2008
EN 16207:2014
EN 15877-1:2012
EN 15806:2010
EN 14601:2005
EN 13715:2006
IEC 62625-1:2013
EN 13103:2009
EN 13262:2004
EN 15839:2012 EN 15955-1:2013
EN 15955-2:2013
EN 15954-1:2013
EN 13977:2011
EN 14813-1:2006
EN 15954-2:2013


All current amendments available at time of purchase are included with the purchase of this document.