This document specifies technical delivery conditions for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 1 to 3 (chemical composition) and Tables 4 to 6 (mechanical properties) and are supplied in the quenched and tempered condition.

The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness of 200 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness of 125 mm for grades S890 and S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa to 960 MPa.

Cross References:
EN ISO 15350
EN 10020:2000
EN 10079
EN 10204
EN 10163-1
EN 10048
EN 10021
EN 10029
CR 10320
EN 10168
EN ISO 14284
EN 1011-2
EN 10051
10315
EN 10164
EN ISO 377
EN 10025-1
EN ISO 148-1
EN 10163-2
EN 10160
EN ISO 6892-1:2016
EN ISO 2566-1
EN ISO 14713-2:2009
EN 10027-2
EN 10027-1
EN 1090-2
CEN/TR 10261
CEN/TR 10347
EN ISO 1461


All current amendments available at time of purchase are included with the purchase of this document.