Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

Scope

This guide defines testing procedures for the slip and pull-out strength testing of bolted dead end strain clamps for use on transmission and distribution lines. This guide covers initial certification testing. For routine acceptance testing, refer to IEEE Std C135.61.

Purpose

The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.

Abstract

New IEEE Standard - Inactive-Reserved. Test procedures for the slip and pullout strength certification testing of bolted dead end strain clamps for use on overhead transmission and distribution lines are covered by this guide.