This item is not available for sale.

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

Scope

1.1.1 This standard applies to newly produced automatic gas ignition systems (see Part IV, Definitions) and components constructed entirely of new, unused parts and materials. An automatic gas ignition system shall perform the following functions:

a. Ignite the gas at the main burner(s), or at the pilot burner(s) so it can ignite the main burner(s); b. Prove the presence of either the ignition source, the main burner flame, or both; and c. Automatically act to shut off the gas supply to the main burner(s), or to the pilot and the main burner(s), when the supervised flame or ignition source is not proved. Components submitted for examination under this standard shall perform one or more of the above functions.

1.1.2 This standard applies to automatic gas ignition systems which also serve as oxygen depletion safety shutoff (ODS) systems (see Part IV, Definitions).

1.1.3 This standard covers automatic gas ignition systems and components intended primarily for use with gas appliances having inputs of 400,000 Btu/hr (117 228 W) or less per individual combustion chamber.

1.1.4 This standard applies to automatic gas ignition systems and components for use with one or more of the following gases: a. Natural; b. Manufactured; c. Mixed; d. Liquefied petroleum; and e. LP gas-air mixtures.

1.1.5 Compliance of an automatic gas ignition system or component with this standard does not imply that such a system or component of such a system is acceptable for use on gas appliances without supplemental tests with the device(s) applied to the particular appliance design.

 

Document History

  1. CAN/CSA ANSI Z21.20-2014/C22.2 NO. 60730-2-5-14


    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

    • Most Recent
  2. CSA ANSI Z21.20-2007/C22.2 NO. 199-2007 (R2012)


    Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements for Automatic Burner Ignition Systems and Components (Bi-National standard, with UL 372)

    • Historical Version
  3. CSA ANSI Z21.20-2005 (R2021)

    👀currently
    viewing


    Automatic Gas Ignition Systems and Components

    • Historical Version
  4. CSA ANSI Z21.20-2000


    Automatic Gas Ignition Systems and Components

    • Historical Version
  5. CAN/CSA C22.2 NO. 199-M89 (R2004)


    Combustion Safety Controls and Solid-State Igniters for Gas- and Oil-Burning Equipment

    • Historical Version
 

Amendments, rulings, supplements, and errata

  1. CSA ANSI Z21.20a-2008 (R2021)


    Addenda to ANSI Z21.20-2005, American National Standard For Automatic Gas Ignition Systems and Components