The purpose of this publication is to provide a standard for small stationary insulated carbon dioxide systems with the capacity of each container being 1000 lb (454 kg) or less. It is intended to assist designers, engineers, distributors, restaurant personnel, inspectors, other users, and all interested parties. This publication does not cover portable tanks built to U.S. Department of Transportation (DOT) standards because they require different procedures and equipment to ensure they are not overfilled.

This standard contains minimum requirements and recommended practice for the design, construction, installation, operation, and maintenance of small stationary insulated carbon dioxide systems. This standard covers these systems from the fill connection to the carbon dioxide container gas outlet regulator, which may include both indoor and outdoor installations. These systems are primarily used for supplying carbon dioxide gas at beverage dispensing sites and can also be used in greenhouses, by welding fabricators, and for other applications. These systems might also be covered by various national, provincial, state, and local codes. The details of these codes are not covered in this publication. Verify applicable codes in your place of business to ensure compliance. Additional information on carbon dioxide is published in CGA G-6.

The system shall be designed so the container does not become liquid full at the pressure setting of the pressure relief device (PRD). The PRD shall discharge to a safe location outside of the building.

Although this publication shows placement of carbon dioxide detection monitors in various portions of the user facility, the responsibility for the proper location, installation, maintenance, and monitoring of the detection monitoring systems and its component parts is not specifically identified in this publication. The user is generally responsible for these activities. If not, they should be fully described in an agreement between the user and their monitoring equipment manufacturer and installer, or in some instances between the user and their carbon dioxide supplier.

While this standard is to be used as a guide for user installations, final approval of the design, equipment, appurtenances, and installation rests with the authority having jurisdiction (AHJ) in this area.