BS EN 62621:2016 specifies characteristics for composite insulators of electric traction overhead contact line systems for railways, as defined in IEC 60913. Insulators specified in this standard are applied for electric traction supply voltages with a nominal voltage greater than 1 000 V for a.c. or a nominal voltage greater than 1 500 V for d.c.. Specific applications where high torsional loads can occur are outside the scope of this standard and particular tests are agreed between the supplier and customer to represent the critical loading arrangements.

This International Standard applies to composite insulators as defined in 3.1 below and not to other polymeric insulators.

The provisions contained in this standard are intended for the design and construction of new electric traction overhead contact line systems using insulators, or when complete refurbishment of existing overhead contact line systems takes place.

This standard provides the purchaser and manufacturer with a range of tests which are used to evaluate the suitability of an insulator product for a given railway environment. Additional tests may be specified by the client to measure the compliance of the insulator under particular operating conditions.

The standard establishes the product characteristics, the test methods and acceptance criteria.

The object of this standard is to stipulate the provisions for the design and provision of the service indicated by the manufacturer to the customer or informed buyer for application on the railway infrastructure.


Cross References:
IEC 60587
EN 60587
IEC/TS 60815-1:2008
IEC/TS 60815-3:2008
IEC 60826
IEC 60850:2007
EN 50163:2004
EN 50163:2004/Corrigendum 1:2010
EN 50163:2004/Corrigendum 2:2013
EN 50163:2004+A1:2007
IEC 60913
EN 50119
IEC 61109:2008
EN 61109:2008
IEC 61467:2008
EN 61467:2008
IEC 61952:2008
EN 61952:2008
IEC 62217:2005
EN 62217:2006
EN 62217:2006/Corrigendum 1:2006
IEC 62497-1:2010
EN 50124-1:2001
EN 50124-1:2001/Corrigendum 1:2007
EN 50124-1:2001/Corrigendum 2:2010
EN 50124-1:2001+A1:2003
EN 50124-1:2001+A2:2005
ISO 34-1
ISO 37
IEC 60050-471
CIGRE 142:1999
CIGRE 22.03 Technical Brochure 184:2001


All current amendments available at time of purchase are included with the purchase of this document.