BS EN 61326-1:2006 specifies requirements for immunity and emissions regarding electromagneticcompatibility (EMC) for electrical equipment, operating from a supply or battery of less than 1 000 V a.c. or 1 500 V d.c. or from the circuit being measured, intended for professional, industrial-process, industrial-manufacturing and educational use, including equipment and computing devices for

- measurement and test;

- control;

- laboratory use;

- accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations.

Computing devices and assemblies and similar equipment within the scope of Information Technology Equipment (ITE) and complying with applicable ITE EMC standards can be used in systems within the scope of this part of IEC 61326 without additional testing, if it is suitable for the intended electromagnetic environment. This product family standard takes precedence over generic standards.

The following equipment is covered in BS EN 61326-1:2006.

a) Electrical measurement and test equipment. This is equipment, which by electrical means measures, indicates or records one or more electrical or non-electrical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies and transducers.

b) Electrical control equipment. This is equipment, which controls one or more output quantities to specific values, with each value determined by manual settings, by local or remote programming, or by one or more input variables.

This includes Industrial Process Measurement and Control (IPMC) equipment, which consists of devices such as:

- process controllers and regulators;

- programmable controllers;

- power supply units for equipment and systems (centralized or dedicated);

- analogue/digital indicators and recorders;

- process instrumentation;

- transducers, positioners, intelligent actuators, etc.

c) Electrical laboratory equipment. This is equipment which measures, indicates monitors or analyses substances, or is used to prepare materials, and includes In Vitro Diagnostic (IVD) equipment. This equipment may also be used in areas other than laboratories, for example self-test IVD equipment may be used in the home.

BS EN 61326-1:2006 is applicable to

- equipment for use in residential, commercial and light-industrial environments, according to IEC 61000-6-1;

- equipment for use in industrial locations;

- equipment for use in laboratories or test and measurement areas with a controlled electromagnetic environment;

-portable test and measurement equipment



Cross References:
IEC 60050-161
IEC 61000-3-2:2000
IEC 61000-3-3:2002
IEC 61000-3-3:1994
IEC 61000-3-3:1994/AMD 1:2001
IEC 61000-3-11:2000
IEC 61000-3-12:2004
IEC 61000-4-2:2001
IEC 61000-4-2:1995
IEC 61000-4-2:1995/AMD 1:1998
IEC 61000-4-2:1995/AMD 2:2000
IEC 61000-4-3:2002
IEC 61000-4-4:2004
IEC 61000-4-5:2001
IEC 61000-4-5:1995
IEC 61000-4-5:1995/AMD 1:2000
IEC 61000-4-6:2003
IEC 61000-4-8:1993
IEC 61000-4-8:1993/AMD 1:2000
IEC 61000-4-11:2004
IEC 61000-6-1:2005
CISPR 11:2003
EN 61000-3-2:2000
EN 61000-3-3:1995
EN 61000-3-3:1995/A1:2001
EN 61000-3-11:2000
EN 61000-3-12:2005
EN 61000-4-2:1995
EN 61000-4-2:1995/A1:1998
EN 61000-4-2:1995/A2:2001
EN 61000-4-3:2002
EN 61000-4-4:2004
EN 61000-4-5:1995
EN 61000-4-5:1995/A1:2001
EN 61000-4-8:1993
EN 61000-4-8:1993/A1:2001
EN 61000-4-11:2004
89/336/EEC
IEC 60050-151
IEC 60050-351
IEC 60359
EN 60359:2002
IEC 61010
EN 61010
IEEE 488.1
IEEE 1284
TIA/EIA-232-F


Partially replaces BS EN 61326:1998.