This document specifies the technical delivery conditions for flat and long products as well as semifinished products which are meant for further processing to flat and long products of hot rolled nonalloy quality steels in the grades and qualities given in Tables 1 to 5 (chemical composition) and Tables 6 to 8 (mechanical properties) in the usual delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 2 and 4) (chemical composition) and Table 7 (mechanical properties). This document does not apply to structural hollow sections (see EN 10210-1 and EN 10219-1) and tubes.

The technical delivery conditions apply to:

— thicknesses ≥ 3 mm and ≤ 150 mm for long products of steel grade S460JR, J0, J2, K2 and S500J0;
— thicknesses ≤ 400 mm for flat products of qualities JR, J0, J2 and K2;
— thicknesses ≤ 250 mm for flat and long products of all other grades and qualities.

The steels specified in this document are not intended to be heat treated except products delivered in the delivery condition +N. Stress relieving is accepted. Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3).

This document foresees that semi-finished products which are to be converted to rolled finished products conforming to this document are the subject of special agreements at the time of the order. The chemical compositions are also agreed to at the time of the order; the values are within the limits of Tables 1 and 2.

For certain grades and product forms suitability for particular applications are specified at the time of the order (see 7.4.2, 7.4.3 and Table 9).

Cross References:
EN 10363
EN ISO 14713-2:2009
EN ISO 377
EN 10058
EN 10051
EN 10056-2
EN 10306
EN 1011-2
EN 10055
EN 10163-1
EN 10163-3
EN 10020:2000
EN 10017
EN 10034
CEN/TR 10347
EN ISO 2566-1
EN 10061
CR 10320
EN 10168
EN 10025-1
EN 10160
EN ISO 15350
EN 10024
EN ISO 9443
EN 10204
EN 10067
EN 10027-2
EN 10060
EN 10079
EN 10021
EN 10315
EN ISO 6892-1:2016
EN 10059
EN 10027-1
EN 10164
EN 10365
EN ISO 14284
EN 10163-2
EN ISO 148-1
EN 10279
EN 10048
EN 10029
EN 10056-1
EN 10308
EN 10162
EN 1090-2
EN 1993-1-10
CEN/TR 10261
EN ISO 1461


All current amendments available at time of purchase are included with the purchase of this document.