Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $57.00
    • Add to Cart
    • Printed Edition + PDF
    • Immediate download
    • $77.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1 This specification covers the grades of fuels for gas turbines, excepting gas turbines used in aircraft, for the guidance of interested parties such as turbine manufacturers and the suppliers and purchasers of fuel oils. These grades are described as follows:
1.1.1 Grades No. 0-GT S5000, No. 0-GT S500, and No. 0-GT S15 includes naphtha, Jet B, and other light hydrocarbon liquids that characteristically have low flash point and low viscosity as compared with kerosine and fuel oils.
1.1.2 Grades No. 1-GT S5000, No. 1-GT S500, and No. 1-GT S15 are a light distillate fuel oil suitable for use in nearly all gas turbines.
1.1.3 Grades No. 2-GT S5000, No. 2-GT S500, and No. 2-GT S15, which is a heavier distillate than Grade No. 1-GT, can be used by gas turbines not requiring the clean burning characteristics of Grade No. 1-GT. Fuel heating equipment may be required by the gas turbine depending on the fuel system design or ambient temperature conditions, or both.
1.1.4 Grade No. 3-GT may be a heavier distillate than Grade No. 2-GT, a residual fuel oil that meets the low ash requirements, or a blend of distillate with a residual fuel oil. Fuel heating will be required by the gas turbine in almost every installation.
1.1.5 Grade No. 4-GT includes most residuals and some topped crudes. Because of the wide variation and lack of control of properties, the gas turbine manufacturer should be consulted with regard to acceptable limits on properties.
1.2 Three appendixes are provided for informational purposes only and do not constitute a requirement of this specification unless mutually agreed upon between the interested parties.
1.2.1 Appendix X1 describes the five grades of gas turbine fuels covered by this specification. Further, it states the significance of various test methods used in inspecting the fuels.
1.2.2 Appendix X2 discusses the sources of fuel contaminants and notes the significance of such contaminants in the operation of gas turbines and gas turbine fuel systems. The particular significance of trace metals in gas turbine fuels is noted. Upper limits of trace metals are recommended for the various grades of gas turbine fuels, but these recommended limits do not constitute a requirement of the specification unless mutually agreed upon by the interested parties. Limitations due to the use of used or recycled oil are also noted.
Note 1: The gas turbine operator should consult Practice D4418 for methods of ensuring fuels of adequate cleanliness and for guidance on long-term storage of distillate fuels and on liquids from non-petroleum sources as gas turbine.
Note 2: The generation and dissipation of static electricity can create problems in the handling of distillate gas turbine fuel oils. For more information on the subject, see Guide D4865.
1.3 This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of gas turbine fuel oils at the time and place of delivery.
1.4 Nothing in this specification shall preclude observance of federal, state, or local regulations which may be more restrictive.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
 

Document History

  1. ASTM D2880-23

    👀currently
    viewing


    Standard Specification for Gas Turbine Fuel Oils

    • Most Recent
  2. ASTM D2880-20


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  3. ASTM D2880-18a


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  4. ASTM D2880-18


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  5. ASTM D2880-15


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  6. ASTM D2880-14a


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  7. ASTM D2880-14


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  8. ASTM D2880-13b


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  9. ASTM D2880-13a


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  10. ASTM D2880-13


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  11. ASTM D2880-03(2010)


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  12. ASTM D2880-03


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  13. ASTM D2880-00


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  14. ASTM D2880-98


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  15. ASTM D2880-96a


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  16. ASTM D2880-96


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  17. ASTM D2880-90a


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version
  18. ASTM D2880-90


    Standard Specification for Gas Turbine Fuel Oils

    • Historical Version