Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $60.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1 This practice covers equipment and procedures for obtaining a representative sample of specification Liquefied Petroleum Gas (LPG), such as specified in Specification D 1835, GPA 2140, and comparable international standards.

1.2 This practice is suitable for obtaining representative samples for all routine tests for LP gases required by Specification D 1835. In the event of a dispute involving sample integrity when sampling for testing against Specification D 1835 requirements, Practice D 3700 shall be used as the referee sampling procedure.

1.3 This practice may also be used for other Natural Gas Liquid (NGL) products that are normally single phase (NGL mix, field butane, etc.), defined in other industry specifications or contractual agreements. It is not intended for non-specification products that contain significant quantities of undissolved gases (N2, CO2), free water or other separated phases, such as raw or unprocessed gas/liquids mixtures and related materials. The same equipment can be used for these purposes, but additional precautions are generally needed to obtain representative samples of multiphase products (see Appendix X1 on Sampling Guidelines in Practice D 3700).

Note 1

Practice D 3700 describes a recommended practice for obtaining a representative sample of a light hydrocarbon fluid and the subsequent preparation of that sample for laboratory analysis when dissolved gases are present. Use of Practice D 1265 will result in a small but predictable low bias for dissolved gases due to the liquid venting procedure to establish the 20 % minimum ullage.

1.4 This practice includes recommendations for the location of a sample point in a line or vessel. It is the responsibility of the user to ensure that the sampling point is located so as to obtain a representative sample.

1.5 &si-value;

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

Document History

  1. ASTM D1265-23a


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    • Most Recent
  2. ASTM D1265-23


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    • Historical Version
  3. ASTM D1265-22


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    • Historical Version
  4. ASTM D1265-11(2017)e1


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    • Historical Version
  5. ASTM D1265-11


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    • Historical Version
  6. ASTM D1265-05

    👀currently
    viewing


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

    • Historical Version
  7. ASTM D1265-04a


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

    • Historical Version
  8. ASTM D1265-04


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

    • Historical Version
  9. ASTM D1265-97


    Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)

    • Historical Version