Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $75.00
    • Add to Cart
    • Printed Edition + PDF
    • Immediate download
    • $101.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1 General-This specification covers deformed and plain low-alloy steel bars in cut lengths and coils for concrete reinforcement intended for applications where restrictive mechanical properties and chemical composition are required for compatibility with controlled tensile property applications or to enhance weldability. The standard sizes and dimensions of deformed bars and their number designations are given in Table 1.

(A) The nominal dimensions of a deformed bar are equivalent to those of a plain round bar having the same weight [mass] per foot [metre] as the deformed bar.

1.2 Grade-Bars are of two minimum yield strength levels: namely, 60 000 psi [420 MPa] and 80 000 psi [550 MPa], designated as Grade 60 [420] and Grade 80 [550], respectively.

1.3 Plain bars, in sizes up to and including 21/2 in. [63.5 mm] in diameter in coils or cut lengths, when ordered, shall be furnished under this specification. For ductility properties (elongation and bending), test provisions of the nearest smaller nominal diameter deformed bar size shall apply. Requirements providing for deformations and marking shall not be applicable.

1.4 Controlled Tensile Properties-This specification limits tensile properties (Table 2) to provide the desired yield/tensile properties for controlled tensile property applications.

(A) Tensile strength shall not be less than 1.25 times the actual yield strength.

1.5 Welding-This specification limits chemical composition (6.2) and carbon equivalent (6.4) to enhance the weldability of the material. When this steel is to be welded, a welding procedure suitable for the chemical composition and intended use or service should be used. The use of the latest edition of AWS D1.4/D1.4M is recommended. The AWS D1.4/D1.4M Welding Code describes the proper selection of the filler metals, preheat/interpass temperatures, as well as, performance and procedure qualification requirements.

1.6 Requirements for alternate bar sizes are presented in Annex A1. The requirements in Annex A1 only apply when specified by the purchaser (see 4.2.5).

1.7 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables, shall not be considered as requirements of this specification.

1.8 This specification is applicable for orders in either inch-pound units (Specification A706) or in SI units [Specification A706M].

1.9 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with this specification.

1.10 This specification does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this specification to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

Document History

  1. ASTM A706/A706M-22a


    Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    • Most Recent
  2. ASTM A706/A706M-22


    Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    • Historical Version
  3. ASTM A706/A706M-16

    👀currently
    viewing


    Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    • Historical Version
  4. ASTM A706/A706M-15


    Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    • Historical Version
  5. ASTM A706/A706M-14


    Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    • Historical Version
  6. ASTM A706/A706M-13


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  7. ASTM A706/A706M-09b


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  8. ASTM A706/A706M-09a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  9. ASTM A706/A706M-09


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  10. ASTM A706/A706M-08a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  11. ASTM A706/A706M-08


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  12. ASTM A706/A706M-06a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  13. ASTM A706/A706M-06


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  14. ASTM A706/A706M-05a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  15. ASTM A706/A706M-05


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  16. ASTM A706/A706M-04b


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  17. ASTM A706/A706M-04a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  18. ASTM A706/A706M-04


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  19. ASTM A706/A706M-03a


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  20. ASTM A706/A706M-03


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  21. ASTM A706/A706M-02


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  22. ASTM A706/A706M-01


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version
  23. ASTM A706/A706M-00


    Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    • Historical Version