Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $60.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1 This specification covers a number of grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and high-temperature service. Most of these grades are commonly known as the "straight-chromium" types and are characterized by being ferromagnetic. Two of these grades, TP410 and UNS S 41500 (Table 1), are amenable to hardening by heat treatment, and the high-chromium, ferritic alloys are sensitive to notch-brittleness on slow cooling to ordinary temperatures. These features should be recognized in the use of these materials. Grade TP439 is used primarily for hot-water tank service and does not require post-weld heat treatment to prevent attack of the heat affected zone.

Note 1--TP329 (S32900) formerly in this specification, has been transferred to Specifications A789/A789M and A790/A790M.

1.2 An optional supplementary requirement is provided, and when desired, shall be so stated in the order.

Note 2--For tubing smaller than 1/2 in. [12.7 mm] in outside diameter, the elongation values given for strip specimens in shall apply. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter or with walls thinner than 0.015 in. [0.4 mm].

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

 

Document History

  1. ASTM A268/A268M-22


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Most Recent
  2. ASTM A268/A268M-20


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  3. ASTM A268/A268M-10(2016)


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  4. ASTM A268/A268M-10


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  5. ASTM A268/A268M-05a


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  6. ASTM A268/A268M-05


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  7. ASTM A268/A268M-04a


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  8. ASTM A268/A268M-04


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  9. ASTM A268/A268M-03


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  10. ASTM A268/A268M-01


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  11. ASTM A268/A268M-00a

    👀currently
    viewing


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version
  12. ASTM A268/A268M-96


    Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    • Historical Version