Language:
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 1-2 business days
    • $65.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

1.1 This specification covers alloy and stainless steel bolting material for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications. The term bolting material as used in this specification covers bars, bolts, screws, studs, stud bolts, and wire. Bars and wire shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be carbide solution treated or carbide solution treated and strain-hardened. When strain hardened austenitic steel is ordered, the purchaser should take special care to ensure that Appendix X1 is thoroughly understood.

1.2 Several grades are covered, including ferritic steels and austenitic stainless steels designated B5, B8, and so forth. Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics.

1.3 The following referenced general requirements are indispensable for application of this specification: Specification A 962/A 962M.

Note 1 - The committee formulating this specification has included fifteen steel types that have been rather extensively used for the present purpose. Other compositions will be considered for inclusion by the committee from time to time as the need becomes apparent.

Note 2 - For grades of alloy-steel bolting material suitable for use at the lower range of high temperature applications, reference should be made to Specification A 354.

Note 3 - For grades of alloy-steel bolting material suitable for use in low temperature applications, reference should be made to Specification A 320/A 320M.

1.4 Nuts for use with this bolting material are covered in Section 14.

1.5 Supplementary Requirements S1 through S14 are provided for use when additional tests or inspection are desired. These shall apply only when specified in the purchase order.

1.6 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable M specification designation (SI units), the material shall be furnished to inch-pound units.

1.7 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Within the text, the SI units are shown in brackets.

 

Document History

  1. ASTM A193/A193M-20


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Most Recent
  2. ASTM A193/A193M-19


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  3. ASTM A193/A193M-17


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  4. ASTM A193/A193M-16


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  5. ASTM A193/A193M-15a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  6. ASTM A193/A193M-15


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  7. ASTM A193/A193M-14a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  8. ASTM A193/A193M-14


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  9. ASTM A193/A193M-12b


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  10. ASTM A193/A193M-12a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  11. ASTM A193/A193M-12


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  12. ASTM A193/A193M-11a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  13. ASTM A193/A193M-11


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  14. ASTM A193/A193M-10a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  15. ASTM A193/A193M-10


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  16. ASTM A193/A193M-09

    👀currently
    viewing


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  17. ASTM A193/A193M-08b


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  18. ASTM A193/A193M-08a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  19. ASTM A193/A193M-08


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  20. ASTM A193/A193M-07


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  21. ASTM A193/A193M-06a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  22. ASTM A193/A193M-06


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

    • Historical Version
  23. ASTM A193/A193M-05


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  24. ASTM A193/A193M-04c


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  25. ASTM A193/A193M-04b


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  26. ASTM A193/A193M-04a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  27. ASTM A193/A193M-03


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  28. ASTM A193/A193M-01b


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  29. ASTM A193/A193M-01a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  30. ASTM A193/A193M-01


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  31. ASTM A193/A193M-00b


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  32. ASTM A193/A193M-00a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  33. ASTM A193/A193M-98a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version
  34. ASTM A193-90a


    Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

    • Historical Version