Industrial Trucks, Internal Combustion Engine-Powered

UL 558

1 Scope

1.1 These requirements cover the fire safety aspects of industrial trucks with internal-combustion engines, such as tractors, platform-lift trucks, fork-lift trucks, and other specialized vehicles for industrial use. These requirements do not cover other possible safety aspects of such equipment.

1.2 These requirements do not cover farm or road vehicles or automotive vehicles for highway use.

1.3 The Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations, NFPA 505, identifies internal combustion engine powered industrial trucks as follows:

Types G, D, LP, and G/LP - A unit powered by gasoline (G), diesel (D), LP-gas (LP), or either gasoline or liquefied petroleum gas (G/LP), that has minimum acceptable safeguards against inherent fire hazards.

Types GS, DS, LPS, and GS/LPS - A unit powered by gasoline (GS), diesel (DS), or LP-gas (LPS), or either gasoline or liquefied petroleum gas (GS/LPS) that, in addition to meeting all the requirements for Types G, D, LP, and G/LP, is provided with additional safeguards to the exhaust, fuel and electric systems.

Type DY - A diesel-powered unit that has all the safeguards of Type DS units and, in addition, any electric equipment is completely enclosed and equipped with temperature limitation features.

1.3 revised May 17, 2010

1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.