Language:
    • Available Formats
    •  
    • Availability
    • Priced From ( in USD )
    • Secure PDF 🔒
    • Immediate download
    • $168.00
    • Add to Cart
    • Printed Edition
    • Ships in 1-2 business days
    • $168.00
    • Add to Cart

Customers Who Bought This Also Bought

 

About This Item

 

Full Description

Preface:

This is the eleventh edition of the CSA O80 Series of Standards, Wood preservation. It supersedes the previous editions published in 2008, 1997, 1989, 1983, 1974, 1970, 1966, 1962, 1959, and 1954.

This edition's technical requirements are organized in the Use Category System (UCS). The UCS is designed to facilitate selection of the appropriate wood species, preservative, penetration, and retention (loading) by the specifier and user of treated wood by more accurately matching the species, preservative, penetration, and retention for typical moisture conditions and wood biodeterioration agents to the intended end use.

This Series of Standards consists of five Standards, as follows:
  • CSA O80.0, General requirements for wood preservation, specifies requirements and provides information applicable to the entire Series of Standards.
  • CSA O80.1, Specification of treated wood, is intended to help specifiers and users of treated wood products identify appropriate requirements for preservatives for various wood products and end use environments.
  • CSA O80.2, Processing and treatment, specifies minimum requirements and process limitations for treating wood products.
  • CSA O80.3, Preservative formulations, specifies requirements for preservatives not referenced elsewhere. The Technical Committee on Wood Preservation intends that CSA O80.3 will be used to accommodate additional preservative formulations (if any) in future editions of this Series of Standards.
  • CSA O80.4 has been withdrawn.
  • CSA O80.5, CCA Additives — Utility Poles, specifies requirements for preparation and use of CCA preservative/additive combinations for utility poles permitted by CSA O80.1 and CSA O80.2.
Users of this Series of Standards should also note the following:
  • In 2012 PMRA registration requirements for Micronized Copper Azole (MCA) and Micronized Copper Quat (MCQ) were fulfilled and added to the CSA O80 Series of Standards
  • In 2013, requirements for alkaline copper quat, Type A (ACQ-A), were added to the CSA O80 Series of Standards.
  • The current edition of this Series of Standards also includes requirements for the treatment of hardwood and softwood crossties and switchties with ACZA.
  • Minimum requirements for fire retardant treatments are specified in Clause 8.9 of CSA O80.1 and Clause 9.8 of CSA O80.2. The Technical Committee intends that Clause 8.9 of CSA O80.1 and Clause 9.8 of CSA O80.2 will be used to accommodate standardized fire retardant treatments (if any) in future editions of this Series of Standards.
  • The process of including new preservatives to the CSA O80 Series of Standards have been included in CSA O80.0, Annex B.
The Technical Committee wishes to thank the American Wood Protection Association (AWPA) and its committee members for their assistance in developing CSA O80.1 and CSA O80.2 and adapting the UCS to Canadian needs. This Series of Standards incorporates requirements from Standards published by AWPA and the American Society for Testing and Materials (ASTM International), modified where necessary to suit Canadian conditions. AWPA Standards are copyrighted by AWPA. Content from AWPA Standards is reproduced in the CSA O80 Series of Standards with permission. To purchase AWPA Standards, updates, and amendments, visit http://www.awpa.com.

The Technical Committee's practice of annually reviewing changes to AWPA Standards has been discontinued. Revisions to AWPA Analytical (A), Evaluation (E), Hydrocarbon Solvent Standards H (HS-) and Miscellaneous (M) Standards, and to AWPA Conversion Factors and Correction Tables, will be incorporated into future editions of this Series of Standards as a matter of course unless the Technical Committee decides otherwise. Revisions to AWPA U1 and T1 Standards (formerly Commodity (C) Standards) and to AWPA Preservative (P) Standards will be considered for incorporation into future editions of this Series of Standards only at the request of an interested party.

The Technical Committee's practice of annually reviewing changes to applicable ASTM Standards continues. Revisions to applicable ASTM Standards will be incorporated into future editions of this Series of Standards when appropriate.

This Series of Standards specifies minimum requirements that will provide satisfactory service and appropriate protection for users.

--------------------------------------------------------------------------------------------------------------------------------

O80.0-15 - General requirements for wood preservation

Scope:

1.1
The CSA O80 Series of Standards specifies requirements related to the preservation and fire retardance of wood through chemical treatment (pressure and thermal impregnation). The subjects covered include materials and their analysis, pressure and thermal impregnation procedures, and fabrication and installation to put treated wood into service.

1.2
This Standard lists reference publications and provides definitions applicable to the entire CSA O80 Series of Standards. This Standard also describes how the CSA O80 Series of Standards differs from related AWPA Standards and addresses the need for preservative registration. Recommendations on the use of the CSA O80 Series of Standards and related AWPA Standards can be found in Annex A.
Note: In Canada, preservative registration is carried out through Health Canada's Pest Management Regulatory Agency.

1.3
The requirements and recommendations of the CSA O80 Series of Standards are based solely on the treatment efficacy of the chemicals in question. The CSA O80 Series of Standards does not necessarily take all laws and regulations into account.
Note: It is the responsibility of the users of the CSA O80 Series of Standards to ensure that their use of preservatives does not conflict with applicable laws and regulations.

1.4
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

--------------------------------------------------------------------------------------------------------------------------------

O80.1-15 - Specification of treated wood

Scope:

1.1
This Standard is intended to help specifiers identify appropriate requirements for specific wood products and end use environments.
Note: The existence of a particular requirement in this Standard does not imply that the permitted combination of preservatives, processes, and/or wood species will be recognized by a regulatory body.

1.2
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

--------------------------------------------------------------------------------------------------------------------------------

O80.2-15 - Processing and treatment

Scope:

1.1
This Standard specifies minimum requirements for treatment of wood products covered by the CSA O80 Series of Standards, including conditioning for treatment, treatment processes and limitations, end results of treatment, post-treatment handling, and quality control. Treatment practices and results should comply with the CSA O80 Series of Standards as a whole and, subject to Clause 4 of CSA O80.0, the relevant AWPA Standards.

1.2
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

--------------------------------------------------------------------------------------------------------------------------------

O80.3-15 - Preservative formulations

Scope:

1.1
This Standard specifies preservative requirements not referenced elsewhere.
Note: It is intended that this Standard will be used to accommodate additional preservative formulations (if any) in future editions of the CSA O80 Series of Standards.

1.2
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

--------------------------------------------------------------------------------------------------------------------------------

O80.5-15 - CCA Additives — Utility Poles

Scope:

1.1
This Standard specifies requirements for preparation and use of CCA preservative/additive combinations for utility poles permitted by CSA O80.1 and CSA O80.2.

1.2
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
 

Document History

  1. CAN/CSA O80 SERIES:21


    Wood Preservation, Includes Administrative Update (2022) and Errata (2022)

    • Most Recent
  2. CAN/CSA O80 SERIES-15 (R2020)

    👀currently
    viewing


    Wood Preservation, Includes Update No. 1 (2017) and Update No. 2 (2019)

    • Historical Version
  3. CSA O80 SERIES-08


    Preservation du bois, Mise a jour no 1 (2008), no 2 (2011), no 3 (2012), no 4 (2012)

    • Historical Version
  4. CSA O80 SERIES-08 (R2012)


    Wood Preservation, Includes Update No. 1 (2008), Update No. 2 (2011), Update No. 3 (2012), Update No. 4 (2012)

    • Historical Version
  5. CSA O80 SERIES-97 (R2002)


    Wood Preservation

    • Historical Version