BS ISO 19859:2016 specifies the minimum technical and documentation requirements for the evaluation and procurement of gas turbine systems for electrical power generation. It applies to simple cycle and combined cycle gas turbines for both onshore and offshore applications, where applicable. It also applies to gas turbines used in cogeneration (see ISO 11086:1996, Annex B).

Testing of the gas turbine in combination with a generator is included in the scope. It is not applicable to gas turbines used for all types of propulsion including aircraft, mobile barges, floating production vessels and marine propulsion applications and microturbines.

This International Standard defines the requirements for gas turbine power generation from an international perspective based on the content of existing, recognized ISO and IEC standards to the greatest extent practical. Nonetheless, it is recognized that within the industry other codes or standards are used, some of which are included in the text of this International Standard. The use of other such codes and standards is permissible provided an appropriate and acceptable level of requirements, functional design and safety is achieved and agreement has been reached for their use between the Purchaser and Contractor and such use is suitably documented.

Consideration should be given to applying/using standards in the following hierarchical order: international; regional; national; local.

This International Standard identifies the requirements for both the Purchaser and Contractor attributable to the design and procurement of a gas turbine power generation package. The defined requirements apply to the scope of supply, except where excluded, encompassing the following equipment and the associated selected options, located within the power generation package, listed below:

• gas turbine package;
• load shaft coupling and clutch, as applicable;
• air inlet system;
• exhaust system;
• fuel equipment;
• control equipment;
• electrical equipment;
• additional auxiliary systems, including starting, lubrication, barring, compressor wash, pipework, drains and vents;
• fire and gas protection;
• cooling water equipment.

Where applicable to the integrity of the gas turbine package, the interface and applicable design requirements are included for equipment, utilities and supplies that interface with the power generation package.

Cross References:
ISO 128-1
ISO 1461
ISO 1940-1:2003
ISO 2314:2009
ISO 2409
ISO 2533
ISO 2592
ISO 2909
ISO 2954
ISO 3016
ISO 3104
ISO 3448
ISO 3675
ISO 3746
ISO 3977-1
ISO 3977-3:2004
ISO 3977-4:2002
ISO 3977-8
ISO 3977-9:1999
ISO 4261
ISO 4263-1
ISO 4406
ISO 4407
ISO 5167-1
ISO 6247
ISO 6336-1
ISO 6743-5
ISO 6976
ISO 7919-4:2009
ISO 8501-1
ISO 8501-2
ISO 8501-3
ISO 8502
ISO 8504-1
ISO 9120
ISO 9223
ISO 9614-1
ISO 9614-2
ISO 9951
ISO 10380
ISO 10396
ISO 10441:2007
ISO 10494
ISO 10816-2
ISO 10816-3
ISO 10816-4:2009
ISO 10817-1
ISO 11042-1
ISO 11042-2
ISO 11086:1996
ISO 11204
ISO 11342:1998
ISO 12100
ISO 12151-1
ISO 12151-2
ISO 12944-1
ISO 12944-2:1998
ISO 12944-4
ISO 13691
ISO 13938-1
ISO 14122-1
ISO 14122-2:2001
ISO 14122-3
ISO 14122-4
ISO 14123-1
ISO 14691
ISO 14713-2
ISO 15649
ISO 16276-2
ISO 18752
ISO 19840
ISO 19860:2005
ISO 21789:2009
ISO 21940-13
ISO 21940-31
ISO 21940-32
ISO 22266-1
ISO 80000-1
IEC 60034-1
IEC 60034-3:2010
IEC 60034-5
IEC 60038:2009
IEC 60079-10-1
IEC 60079-11
IEC 60079-14:2013
IEC 60146-1
IEC 60204-1:2009
IEC 60204-11
IEC 60304
IEC 60332
IEC 60364-1
IEC 60364-4-41
IEC 60417
IEC 60439
IEC 60445
IEC 60502
IEC 60529:2013
IEC 60757
IEC 60896
IEC 60947
IEC 60947-7-1
IEC 61000-2-2
IEC 61000-2-4:2002
IEC 61000-4-2
IEC 61000-6-2
IEC 61000-6-3
IEC 61000-6-4
IEC/TR 61000-5-1
IEC/TR 61000-5-2
IEC 61140
IEC 61643-12
IEC 61672-1
IEC 61786
IEC 61918
IEC 61936-1
IEC 62040-1
IEC 62040-2
IEC 62305-1
IEC 62305-4
IEC 82079-1
EN 779
EN 1822-1
EN 1822-5
EN 1837
EN 1838
EN 1997-1
EN 13284-1:2001
EN 13480-1
EN 15259-1:2007
EN 50160
EN 50272-2
EN 50522
IEEE C50.13
IEEE C95.3
IEEE 762:2006
AGMA 6011-I03
AGMA 6011-J14
AGMA 6123-B06
ASHRAE 52.2
API 613
API 670
ASME B31.1
ASME B31.3
ASME PTC 22
ASTM D3786
NAS 1638
NEMA MG1
NFPA 70
NF


All current amendments available at time of purchase are included with the purchase of this document.