BS EN ISO 2082:2017 specifies the requirements of electroplated coatings of cadmium with supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to the electroplater, and describes coating requirements, including those for heat treatment before and after electroplating.

It is not applicable to coatings applied

• to sheet, strip or wire in the non-fabricated form,
• to close-coiled springs, or
• for purposes other than protective, intrinsic lubricity, ductility, electrical conductivity and low contact resistance use.

This document does not specify requirements for the surface condition of the basis metal prior to electrodeposition with cadmium.

The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.

Additional information on corrosion resistance, rinsing and drying, processing parts in bulk and dyeing of chromate conversion coatings is given in Annex C.


Cross References:
ISO 2064:1996
ISO 2177:2003
ISO 2819:1980 (R09)
ISO 3497:2000 Ed 3 (R11)
ISO 9227:2017
ISO 9587:2007 Ed 2 (R11)
ISO 3613:2010 Ed 3
ISO 2178:2016
ISO 9588:2007 Ed 2 (R11)
ISO 10289:1999 (R11)
ISO 10587:2000 (R11)
ISO 4519
ISO 1463:2003 (R08) Ed 3
ISO 2080:2008
ISO 3543:2000 Ed 2 (R11)
ISO 4518:1980
ISO 15724:2001 Ed 1
ASTM E527 - 16
ISO 27831-1:2008 Ed 1
ISO 27830:2008 Ed 1
ISO 3892:2000 (R05) (Ed 2)
ISO 27831-2:2008 Ed 1
ASTM B117 - 16


All current amendments available at time of purchase are included with the purchase of this document.