BS EN ISO 2063-1:2017 specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.

In this document, requirements for the planning of the corrosion protection system and for the constructive design of the component to be protected are specified, where thermal spraying is intended to be the process for the deposition of the metallic corrosion protection.

Some field-related basic terms are defined and instructions for corrosion behaviour of the zinc and aluminium materials under different environment conditions are provided.

Characteristic properties of the coating, e.g. coating thickness, minimum adhesive strength and surface appearance, are specified and test procedures for thermal-sprayed corrosion protection coatings of zinc, aluminium or their alloys are determined.

This document is valid for applying thermal-sprayed zinc and aluminium protection coatings against corrosion in the temperature range between -50 °C to +200 °C, taking into consideration the service conditions of any sealants used. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of this document.

Other corrosion protection processes, e.g. hot-dip galvanizing (galvanic coating), sherardizing, electroplating or selection and deposition of organic coatings/paints are not in the scope of this document.

Requirements for the manufacturing of thermal-sprayed coatings are specified in ISO 2063?2.


Cross References:
ISO 2063-2:2017
ISO 14917:2017
EN 10163-3:2004
ISO 12671:2012
ISO 2178:2016
ISO 8501-1:2007
ISO 8501-3:2006
ISO 1463:2003 (R08) Ed 3
ISO 8044:2015
EN 10163-2:2004
ISO 14919:2015 ED2
ISO 4624:2016
ISO 14923:2003 Ed 1
ISO 14916:2017
ISO 14232-1:2017
ISO 9225:2012
ISO 11124-2:1993 (R08)
EN 13507:2010
ISO 11126-7:1995 (R08)
ISO 8501-2:1994
ISO 9223:2012 Ed 2
ISO 14918:1998
ISO 12944-3:1998
ISO 12944-6:1998
ISO 12944-5:2007 Ed 2
ISO 12944-4:1998
ISO 8502-3:2017
ISO 12944-8:1998
DIN 81249-1:2011 (G/E)
ISO 11126-3:1993(R08)
ISO 14713-1:2017
ISO 12679:2011 Ed 1
ISO 9226:2012
ISO 11126-4:1993 (R08)
ISO 12944-7:1998
ISO 8503-3:2012 ED2
EN 657:2005
ISO 8503-1:2012 ED2
ISO 8503-5:2017
EN 15520:2007
ISO 8503-4:2012 ED2
ISO 9224:2012 Ed 2
ISO 14922
EN 582
ISO 11303:2002 Ed 1
ISO 10474:2013 ED2
ISO 2064:1996
EN 15648:2009
ASTM D4541 - 17
ISO 12944-2:1998
ISO 19840:2012
ISO 12944-1:1998
ISO 8503-2:2012 ED2
ISO 17834:2003 Ed 1


All current amendments available at time of purchase are included with the purchase of this document.