This part of IEC 60512, when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar devices (i.e. when the degradation mechanisms are the same) when specified in a detail (product) specification.

The object of this test is to define a standard test method to assess the ability of connectors to function in a specified manner, in a specified environment which might be encountered during normal use, including storage.

This document provides a standard composite test method for determining the suitability of connectors when subjected to environmental conditions consisting of a sequence of temperature, humidity and, where required, low air pressure environmental stresses.

Cross References:
IEC 60512-11-10
IEC 60512-11-12
EN 60512-17-3
EN 60512-2-2
IEC 60512-11-9
EN 60512-17-1
EN 60512-2-1
IEC 60512-11-11
EN 60512-11-11
EN 60068-2-30
EN 60512-11-12
EN 60512-1-1
EN 60512-11-9
IEC 60512-1-101
EN 60512-13-2
EN 60068-2-1:2007
EN 60068-2-13:1999
IEC 60068-1:2013
EN 60068-2-2:2007
IEC 60068-2-13:1983
IEC 60068-2-1:2007
IEC 60068-2-61:1991
IEC 60068-2-2:2007
EN 60068-1:2014
IEC 60512-17-2
EN 60512-13-1
EN 60512-17-4
IEC 60512-13-2
IEC 60512-2-2
IEC 60512-2-1
IEC 60512-1-1
EN 60512-17-2
IEC 60068-2-30
EN 60512-3-1
IEC 60512-4-1
EN 60068-2-61:1993
IEC 60512-1
EN 60512-4-1
IEC 60512-17-4
IEC 60512-13-1
IEC 60512-17-1
EN 60512-11-10
EN IEC 60512-1
IEC 60512-17-3
IEC 60512-3-1


All current amendments available at time of purchase are included with the purchase of this document.