BS EN 62282-3-200:2016 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows:

• power output under specified operating and transient conditions;
• electrical and heat recovery efficiency under specified operating conditions;
• environmental characteristics; for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions.

This standard does not provide coverage for electromagnetic compatibility (EMC).

This standard does not apply to small stationary fuel cell power systems with electric power output of less than 10 kW which are dealt with IEC 62282-3-201.

Fuel cell power systems may have different subsystems depending upon types of fuel cell and applications, and they have different streams of material and energy into and out of them. However, a common system diagram and boundary has been defined for evaluation of the fuel cell power system (see Figure 1).

The following conditions are considered in order to determine the system boundary of the fuel cell power system:

• all energy recovery systems are included within the system boundary;
• all kinds of electric energy storage devices are considered outside the system boundary;
• calculation of the heating value of the input fuel (such as natural gas, propane gas and pure hydrogen gas, etc.) is based on the conditions of the fuel at the boundary of the fuel cell power system.

Cross References:
IEC 60051
IEC 60359
IEC 60688
IEC 61000-4-7
IEC 61000-4-13
IEC 61028
IEC 61143
IEC 61672-1
IEC 61672-2
IEC 62052-11
IEC 62053-22
IEC 62282-3-201
ISO/IEC Guide 98-3
ISO 3648
ISO 3744
ISO 4677-1
ISO 4677-2
ISO 5167
ISO 5348
ISO 5815-2
ISO 6060
ISO 6326
ISO 6974
ISO 6975
ISO 7934
ISO 7935
ISO 8217
ISO 10101
ISO 10396
ISO 10523
ISO 10849
ISO 11042-1
ISO 11042-2
ISO 11541
ISO 11564
ISO 11632
ISO 14687-1
ISO/TR 15916
ISO 16622
ASTM D4809
ASTM F2602
EN 60051
EN 60359
EN 60688
EN 61000-4-7
EN 61000-4-13
EN 61028
EN 61143
EN 61672-1
EN 61672-2
EN 50470-1
EN 62053-22
EN 62282-3-201
EN ISO 3744
EN ISO 5167
EN ISO 6326
EN ISO 6974
EN ISO 6975
EN ISO 10101
EN ISO 10523
EN ISO 11541
IEC 60050
IEC 60050-151
IEC 60050-300
IEC TS 62282-1:2013
ISO 9000
ISO 10780
ISO 11086
ISO 14687-3
ISO 6976:1995
ASME PTC 50
EN ISO 9000
EN ISO 6976:2005


Replaces BS EN 62282-3-200:2012 which remains current.

All current amendments available at time of purchase are included with the purchase of this document.