BS EN 12831-1:2017 covers methods for the calculation of the design heat load for single rooms, building entities and buildings, where the design heat load is defined as the heat supply (power) needed to maintain the required internal design temperature under design external conditions.

Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.

NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.

NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.


Cross References:
EN ISO 52000-1
EN ISO 6946:2017
ISO 6946:2017
ISO 10077-1:2017
EN ISO 13370 (ISO 13370:2007) AS
ISO 7345:1987
ENISO 7345
ISO 13789:2017
ISO 13370:2017
EN ISO 13789 (ISO 13789:2007) AS
EN ISO 9972 (ISO 9972:2015) AS
EN ISO 10077-1 (ISO 10077-1:2006) AS
ISO 9972:2015 EN 15316-4-5:2017
ISO/TR 52000-2:2017
EN 15316-4-4:2017
ISO 10077-2:2017
ISO 15927-5:2004 Ed 1
EN ISO 15927-5 (ISO 15927-5:2004) AS
EN 15316-3:2017
EN 15378-1:2017
EN 15316-4-1:2017
EN 12524:2000
ISO 10211:2017
ISO 10456:2007
EN ISO 10077-2:2017
EN 15316-4-2:2017
EN 15459-1:2017
ISO 7730:2005 (R09) Ed 3
EN ISO 10456 (ISO 10456:2007) AS
ISO 14683:2017
EN 673:2011
EN 15316-4-3:2017
EN 15316-4-10:2017
EN 12831-3:2017
EN ISO 10211:2017
EN ISO 52000-1
EN 15316-4-8:2017
CENISO/TR 52000-2
EN 15316-1:2017
CEN/TR 12831-2:2017
EN 15316-2:2017
EN ISO 7730 (ISO 7730:2005) AS
EN 15378-3:2017
ENISO 14683


All current amendments available at time of purchase are included with the purchase of this document.