• Techstreet Clients
• Press Releases
• Services for Publishers

ASABETHERNET
Automated Solutions, Inc.
Version:	1.1c
Release Date:	6/99
File Size:	1829K
License:
Limitations:	90 day evaluation
Minimum Requirements:	Windows 95/98/NT
Description: ActiveX Control provides Ethernet TCP/IP connectivity to Allen-Bradley PLC5 and SLC5/05 PLCs.

Download Here

ASABDH
Automated Solutions, Inc.
Version:	2.0c
Release Date:	5/99
File Size:	2082K
License:
Limitations:	90 day evaluation
Minimum Requirements:	Windows 95/98/NT
Description: ActiveX Control provides Data Highway + connectivity to Allen-Bradley PLC5 and SLC5/04 PLCs.

Download Here

ASMODRTU
Automated Solutions, Inc.
Version:	1.4
Release Date:	5/99
File Size:	1849K
License:
Limitations:	90 day evaluation
Minimum Requirements:	Windows 95/98/NT
Description: ActiveX Control provides Modbus RTU and ASCII connectivity to Modicon PLCs and Modbus compatible devices.

Download Here

ASMBPLUS
Automated Solutions, Inc.
Version:	1.1a
Release Date:	5/99
File Size:	2784K
License:
Limitations:	90 day evaluation
Minimum Requirements:	Windows 95/98/NT
Description: ActiveX Control provides Modbus PLUS connectivity to Modicon PLCs and Modbus PLUS compatible devices.

Download Here

ASGraphiX Suite 1
Automated Solutions, Inc.
Version:	1.0b
Release Date:	5/99
File Size:	2033K
License:
Limitations:	90 day evaluation
Minimum Requirements:	Windows 95/98/NT
Description: ActiveX Control provides process graphics for HMI/MMI/SCADA construction. Graphics include vessels, valves, motors, pumps. Additional suites coming for pipes, mixing, heating, cooling, conveyors, sequencers, gates, etc.

Download Here

BeamTools
Phelps Software	Browse Related Books and Standards Structural Steel Design Steel Beams Machine Design Stress Analysis
Version:	1.06
Release Date:	7/99
File Size:	987K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: BeamTools is a software implementation of the first twelve beam stress analysis cases found in Roark's and Young's Formulas for Stress and Strain for single spans. (Sixth addition, pages 100 - 105)BeamTools was created especially for engineers and designers doing structural machine design and stress analysis of machine elements, components and supporting structures. The result is a greatly simplified interface that is less demanding and confusing than beam software programs written for complex structural steel design.

Download Here

BillPower
Integra Computing
Version:	3.1
Release Date:	7/99
File Size:	918K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: BillPower is a fully integrated timekeeping, billing, and bookkeeping system that will produce a wide variety of reports, including income-expense statements, balance sheets and aged receivables reports. The user has wide latitude in designing billing formats that use any font and place transaction data wherever desired. The program will even print mailing labels and form letters to your clients. This is a "real time" system. No old fashioned batch postings or end-of-period close-outs are ever needed. Transaction detail is retained until the user (not the program) decides to omit it. In fact, old bills may even be re-prepared long after other systems would have "flushed" the needed information from the data base. Much more. Runs on single PC or network

Download Here

Chronilist
Integra Computing
Version:	3.1
Release Date:	7/99
File Size:	918K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Chronilist will handle not only your busy itinerary, but that of everyone in your office. A convenient phonebook and many unique scheduling features make this a no-nonsense, get-down-to-business program. It will prepare calendars and other reports that display one person's upcoming events or those for several people simultaneously. Data can be filtered when a report is generated, so that only events for a particular project (or other criteria) will be displayed. Chronilist will optionally drag events forward from day to day until completed. Related events may be linked, so that a change to one will result in the automatic modification of others. Finding free time, establishing recurring events, and viewing religious dates (Christian, Jewish, and Muslim) are a snap. Automatically checks for scheduling conflicts. And there's much, much more, including the ability to track money spent, money received, and time spent doing things, all with full reporting features. Runs on single PC or network.

Download Here

ControlDraw
ControlDraw Ltd.	Browse Related Books and Standards ISA Control Publications Process Control
Version:	1
Release Date:
File Size:	6MB
License:	Free
Limitations:
Minimum Requirements:	Windows 98/NT; version 1 also supports Win. 3.1
Description: ControlDraw is a diagram processor. It provides unique integrated drawing and data handling functions. ControlDraw includes tools for the design, specification and documentation of Process Control Systems. ControlDraw has been designed for both batch and continuous processes, but has many further applications in other areas such as software design. For Continuous processes ControlDraw is an excellent system for designing modulating control loops, start-up, shutdown and interlock logic. With Batch processes, ControlDraw can be used to generate the physical and procedural models in accordance with the S88.01 standard.

Download Here

DataFit
Oakdale Engineering
Version:	6.1
Release Date:	5/99
File Size:	5745K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: DataFit performs nonlinear regression (curve fitting) with 2D/3D plotting capability. Intuitive graphical interface allows you to easily perform regression analysis on data with 1 to 20 independent variables. Data can be imported, or entered through a standard spreadsheet interface. You can define your own regression models, or choose from over 350 built in commonly used models. Solved models are sorted automatically according to goodness of fit. Results include plots of the regression models, q-q plots, scatter plots, fitted parameters with confidence intervals, input vs. estimated data, and goodness of fit statistics. You can create 2D and 3D plots of raw data and/or regression models by selecting the desired information from a list of available data. Each plot is customizable, including fonts, line styles, error bars, footnotes, contours, extrapolation, et. Plots can be saved or copied to the clipboard for use in other applications. Data table export of regression models supports extrapolation, and you can also export source code in BASIC or C to use a model in a user written program. A Data Calculator allows manipulation of raw data or regression models, performing over 70 mathematical operations. With the combination of the intuitive interface, online help and wide range of features, it is a tool efficiently used by both beginners and experts.

Download Here

DXF-Manager Software for Displaying and Converting of DXF Files
Hexagon
Version:
Release Date:
File Size:	357K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: DXF-Manager for viewing DXF files and conversion to IGES, CNC-Code, HP-GL, HP-GL/2, Postscript, Pascal, C. Application Example: Generating CNC-Programs from CAD drawing.

Download Here

Engineering Power Tools
Version:
Release Date:
File Size:	1.2MB
License:	Shareware
Limitations:
Minimum Requirements:	Win 3.x/95/98/NT
Description: ENGINEERING POWER TOOLS is a POWERFUL engineering tool for use by both students and professionals. OVER 70 program modules and data tables are organized into one EASY-TO-USE package. The programs solve a wide variety of common engineering problems QUICKLY and easily. ELIMINATE WASTED TIME, hunting through manuals and performing calculations by hand. With POWER TOOLS the information and formulas you need are only a click away. Categories included are: Math, HVAC, Mechanical, Electrical, Materials and Structural. Context sensitive Windows Help is provided. The registered version allows saving and restoring of data files as well as printing of all forms. POWER TOOLS can be easily NETWORKED from a single location (multiple installations are not typically required).

Download 16 Bit Version
Download 32 Bit Version

EngVert
G & P Engineering Software
Version:	1.4
Release Date:	2001
File Size:	5086K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 9X/NT/ME/2000
Description: An advanced engineering unit conversion application.

Download Here

Euro Assistant Pro
MaBaSoft
Version:	2.0.1
Release Date:	7/99
File Size:	504K
License:	Shareware
Limitations:	15 day evalutation
Minimum Requirements:	Mac OS
Description: Euro Assistant Pro is an easy-to-use, but powerful currency conversion utility directed to both European and non-European users. Euro Assistant Pro lets you: - convert the 15 European Union currencies and 6 other "important" currencies (US Dollar, Canadian Dollar, Australian Dollar, Japanese Yen, Swiss Franc and Norvegian Krone) to euro and back; - convert any national currency to any other national currency; - calculate multiple conversions (up to 12 currencies can be simultaneously displayed); - calculate and convert the result of algebraic expressions; - specify a base currency different from euro; - define up to 5 custom currencies; - automatically update exchange rates over the Internet (Exchange rates are provided by OANDA) and are retrieved using OANDA Foreign Exchange Protocol; - import and automatically convert series of values stored in text files and clippings; - log and print conversions; - save or clip conversions to a text file. Euro Assistant Pro exists in two versions: a multilingual version running in 8 languages (English, German, French, Italian, Dutch, Danish, Swedish, Finnish) and a Japanese version.

Download Here

FED1 Helical Compression Spring Software
Hexagon
Version:
Release Date:
File Size:	638K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Design and recalculation of cylindrical helical compression springs according to DIN 2089 Output of results printout, extract, characteristic curve of the spring, Goodman chart, buckling field, temperature chart, quick output Production drawing according to DIN 2099 Drawing of the spring viewed as an elevation and cross- section Calculation of waste for special tolerances

Download Here

FED2 Helical Extension Spring Software
Hexagon
Version:
Release Date:
File Size:	616K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Design and recalculation of extension springs according to DIN 2089 Part 2 Output of results printout, extract, characteristic curve of the spring, Goodman chart, temperature chart, quick output Production drawing according to DIN 2099 Drawing of the spring for any clamping length FED2+ also includes a spring database, cost-calculation program and animation

Download Here

FED3+ Helical Torsion Spring Software
Hexagon
Version:
Release Date:
File Size:	598K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Design and recalculation of spiral springs according to DIN 2088 Output of results printout, extract, characteristic curve of the spring, Goodman chart, quick output Axial and radial drawings of the spring FED3+ also includes the output of a production drawing

Download Here

FED4 Cup Spring Software
Hexagon
Version:
Release Date:
File Size:	492K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Design and recalculation of cup springs and cup-spring assemblies according to DIN 2092 Output of results printout, extract, characteristic curve of the spring, stress characteristic, Goodman chart CAD drawing for elevation and cross-section

Download Here

FED5 Conical Compression Spring Software
Hexagon
Version:
Release Date:
File Size:	598K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Design and recalculation of conical helical compression springs Output of results printout, extract, progressive characteristic curve of the spring, Goodman chart, stress characteristic, graphs of the spring rate and spring energy CAD drawing for any clamping lengths Animation

Download Here

FED6 Nonlinear Cylindrical Compression Spring Software
Hexagon
Version:
Release Date:
File Size:	606K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Calculation of non-linear, cylindrical helical compression springs Output of results printout, extract, progressive characteristic curve of the spring, Goodman chart, graphs of the spring rate and spring energy CAD drawing for any clamping lengths between L0 and Lc Animation

Download Here

FED7 Nonlinear Compression Spring Software
Hexagon
Version:
Release Date:
File Size:	562K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Calculation of non-linear, helical compression springs of any shape Output of results printout, extract, progressive characteristic curve of the spring, Goodman chart, graphs of the spring rate and spring energy Animation

Download Here

FED8 Torsion Bar Software
Hexagon
Version:
Release Date:
File Size:	541K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Calculation of Torsion bars Output of results printout, extract, characteristic line, spring energy True-scale CAD drawing

Download Here

FINANCIAL AUTHORITY
Conrad Button's Software
Version:
Release Date:
File Size:	955K
License:
Limitations:
Minimum Requirements:
Description: FINANCIAL AUTHORITY has seven financial analysis tools: Loans, Annuities, Periodic and Fixed Investments, Retirement Planning, EE Bond Record Keeping and Evaluation, Mutual Fund Analysis, as well as an Assets Database. Over 35 financial calculations can be performed. Loan, investment, and retirement schedules can be generated as either tables or graphs and printed out or copied to the clipboard for insertion into other programs.

Download Here

FLUIDTOOLS Liquid and Gas
Phelps Software
Version:	9.15
Release Date:	7/99
File Size:	735K
License:	Demo
Limitations:
Minimum Requirements:	Win 3.1/95/98/NT
Description: FLUIDTOOLS is a group of fluid flow programs. All are straight forward easy to use programs. Liquids - calculates any size diameter, length, quantity, pressure or viscosity for liquids given any of the other four parameters. Also returns values for horsepower, shear rate and fluid velocity. FLUIDTOOLS is based on the formulas found in Crane Technical Paper #410. Pop up list for viscosity, pipes, fittings, valves, pipe roughness and specific gravity are provided. FLUIDTOOLS is a steady state program, inertial effect and loads are not calculated. FLUIDTOOLS provides solutions for single branches.

Download f5001.exe
Download f500g.exe

TOL1 Tolerance Calculation Software
Hexagon
Version:
Release Date:
File Size:	426K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: The TOL1 software helps you to reduce both the time spent calculating dimension chains and the potential sources of errors to a minimum. In future, you can calculate tolerances simply by generating a diagram of the elements and a table of all the relevant dimensions and tolerances - TOL1 takes care of the rest.

Download Here

GEO1 Software for calculation of profiles and cross-sections
Hexagon
Version:
Release Date:
File Size:	514K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: GEO1 software calculates cross-section areas, surface moment of inertia, center of gravity and mass moment of inertia of any cross-section made up of up to 200 lines and arcs.

Download Here

HPGL-Manager
Hexagon
Version:
Release Date:
File Size:	325K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: HPGL-Manager for displaying and converting of HP-GL and HP-GL/2 plot files. HPGL-Manager for viewing HP-GL and HP-GL/2 files and conversion to DXF, IGES, CNC-Code, HP-GL, HP-GL/2, Postscript, Pascal, C. Application Example: Conversion of plot files to CAD code DXF or IGES.

Download Here

HPGLVIEW for displaying of HP-GL and HP-GL/2 plot files
Hexagon
Version:
Release Date:
File Size:	323K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: Viewer for plot files in HP-GL and HP-GL/2 code. Application example: Paperless Drawing Management.

Download Here

HYDROFLO and PumpBase
Tahoe Design Software	Browse Related Books and Standards Fluid Dynamics Pump Curve API 11L4 Fluid Conveyance Pumps
Version:
Release Date:
File Size:	5Mb+
License:	Individual
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: HYDROFLO for Windows 95/98 is a tool for the analysis of smaller fluid conveyance systems consisting of one source and one discharge and up to 10 pumps operating in parallel or series. The steady-state pressures and flows for the system are determined. HYDROFLO features... - Unique vertically scaled workspace - "Click and Drop" elements into your design - Extremely accurate and professional - Graphic printouts of entire system - "Fly-over" element data viewing - Direct communication with PumpBase for pump selection - Powerful and affordable - Offers the Hazen-Williams equation for water systems and the Darcy-Wiesbach equation for any fluid system - Easy-to-use, intuitive interface - Analyzes systems conveying ANY type of liquid - Determines possible cavitation problems - All English, metric and SI units available PumpBaseT for WindowsT 95/98 finds the best pumps for your fluid conveyance application. Specify up to 40 selection criteria. The pump curve database contains thousands of curves from 40+ pump manufacturers. A detailed report is created that can be submitted to pump manufacturers or sales representative for further application verification and price quotes. PumpBase features... - Complete pump curve database access and editing. - Communicates with HYDROFLO for system curve development. - Quick affinity law conversions for speed and trim. - Extensive and editable liquid property database. - Automatic viscosity corrections to pump curves. - Efficiency and NPSHR curves are plotted on pump graphics. - Both English and SI (metric) units. - User Project files save all selection information. - Pump Manufacturer Technical Bulletins available. - Pumped liquid temperature rise calculations.

Download Hydroflow Here Download Pumpbase Here

hyd-ROsat and hyd-RO-dose(tm)
French Creek Software	Browse Related Books and Standards Membranes Water Treatment
Version:	1.2
Release Date:	7/99
File Size:	470K
License:	Demo
Limitations:
Minimum Requirements:	Win 3.1/Win NT/Win 95/98
Description: hyd-RO-sat predicts scale formation in membrane systems and provide a computer simulation of brine (reject) chemistry. Advanced versions optimize pH control and scale inhibitor dosages. Used by water treatment chemists, design engineers, consultants.

Download Here

KURV+
Conrad Button's Software
Version:
Release Date:
File Size:	966K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: KURV+ is a statistical analysis program with three mathematical modules. Curve Fitting: Data points supplied by the user are processed to determine the coefficients for 28 mathematical equations (including up to 5th order polynomials). The correlation coefficient for each equation is also determined. Graphical and tabular comparisons between the equations and the data are easily displayed. Predicted Y, over any range of X, is readily available. Multiple Linear Regression: In multiple regression, the dependent variable (Y) is predicted in terms of 2 or more independent variables or predictors (X1, X2, ). KURV+ will calculate the least-squares coefficients for linear regression with two, three, or four predictors. Fundamental Statistics: This module calculates the mean, variance, and standard deviation of data sets supplied by the user. A Graph Builder and a statistical calculator are also included.

Download Here

LG1 Roll-contact Bearing Calculation Software
HEXAGON	Browse Related Books and Standards Ball Bearings DIN Bearings Roller Bearings
Version:
Release Date:
File Size:	587K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: The LG1 software calculates the bearing lifetime for grooved ball bearings, self-aligning ball bearings, needle bushes, cylinder roller bearings, taper roller bearings and self-aligning roll bearings according to DIN. Modified lifetime according to specifications of the roller bearing manufacturers can also be calculated when you input the data for lubricant viscosity, bearing temperature and life expectancy. For an accurate calculation which takes lubricant gap cleanliness into account you can either enter your own data for the lubricant and material factor a23, or have LG1 calculate it for you. You can enter the middle radial and/or axial force directly, or have them calculated by LG1 from the load collective, static and alternating force components or constantly increasing force.

Download Here

MATHBOOK+
Conrad Button's Software	Browse Related Books and Standards Integral Calculus Advanced Algebra Geometry
Version:
Release Date:
File Size:	971K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: MATHBOOK+ is a math, science, and engineering program. It contains five mathematical modules. The Integral Calculus module computes definite integrals from functions or from data. The Advanced Algebra module has seven options including progressions, binomials, permutations/combinations, linear equations, quadratic equations, N factorial, and sum of first N numbers. The Geometry/Trig module calculates areas of plane and solid figures, volume, irregular polygons, and parts of a triangle. The Random Number module generates random number tables, between any two bounds, in either integer or decimal format. The Metric Conversion module converts length, weight, area, volume, power, work, speed, temperature, and pressure. A Graph Builder and a scientific calculator are also included.

Download Here

Packed Column Calculator
Katmar Software	Browse Related Books and Standards Cooling Tower Distillation Hydraulic Design Packed Columns
Version:	1.1
Release Date:	8/98
File Size:	729K
License:	Shareware
Limitations:	30 day evaluation
Minimum Requirements:	Win 3.1/95/98/NT
Description: PackCol performs hydraulic design for new packed columns or rating calculations for existing columns and towers. The design basis can be approach to flood, maximum capacity or pressure drop. Includes a database of packing types, but custom data can be used. The Eckert and Robbins correlations are included to cover the full flowrate range. Results can be printed in tabular form, and plotted as a Generalised Pressure Drop Correlation diagram or as an Operating Diagram. Detailed manual and tutorial included in Word v6 format.

Download Here

PhysProps
G & P Engineering Software
Version:	1.6
Release Date:	2001
File Size:	11164K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 9X/NT/ME/2000
Description: A pure component physical property database and property estimation software application.

Download Here

PipeDrop
G & P Engineering Software
Version:	1.21
Release Date:	2001
File Size:	8123K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 9X/NT/ME/2000
Description: An advanced hydraulic pressure drop calculator for liquids, gases and two-phase flow for scientists, engineers and technicians.

Download Here

Project Risk Analysis
Katmar Software	Browse Related Books and Standards Cost Engineering Project Management
Version:	1.0
Release Date:	2/98
File Size:	596K
License:	Shareware
Limitations:	30 day evaluation
Minimum Requirements:	Win 3.1/95/98/NT
Description: Project Risk Analysis is for Cost Engineering and Project Management pro's who must develop cost estimates of known accuracy and risk on capital investment projects. Uses Monte Carlo Simulation to find the contingency needed to achieve any desired level of confidence. All statistical models are already set up. Output in graphical and tabular form. Spreadsheets can be imported as ASCII text. Detailed manual and tutorials included in Word v6 format.

Download Here

Quit CSM
MaBaSoft
Version:	1.7.5
Release Date:	7/99
File Size:	204K
License:	Shareware
Limitations:	15 day evalutation
Minimum Requirements:	Mac
Description: Quit CSM is a module for the Control Strip which lets you: - quit applications without having to make them active: you can quit a single application, all background applications or all running applications; - quit and restart the Finder; - quit background-only applications; - display the largest unused memory block or the memory in use; - show application sizes; - enable a hot spot for showing and hiding the Control Strip; - hide the background applications and show all running applications; - automatically hide the front application before each context switch (requires MacOS 8.0 or higher); - restart and shut down your computer. Quit CSM is available in English, Japanese, German, Dutch, French and Italian.

Download Here

SignOut
Integra Computing
Version:	3.1
Release Date:	7/99
File Size:	385K
License:	Shareware
Limitations:
Minimum Requirements:	Win95/98/NT
Description: SignOut is a network-based electronic office sign-out board that lets others know where you're going. At the touch of a few keys, you can find where anyone in the office has gone, how to reach him, and when he expects to return. Also includes a message center where you may leave messages for office-mates when they are out. Very simple to use.

Download Here

SR1 Software for Calculation of Bolted Joints
HEXAGON	Browse Related Books and Standards Bolted Joints Bolted Joints VDI 2230
Version:
Release Date:
File Size:	627K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: SR1 Software calculates, in accordance with VDI 2230, high-stress bolted joints with concentric or eccentric strain and load. The calculation makes enables graphical representation of load-extension diagrams and scale drawings.

Download Here

The Laminator
Michael Lindell
Version:	2.5
Release Date:	7/99
File Size:	332K
License:	Shareware
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: The Laminator is a shareware engineering program that analyzes laminated composite plates according to classical laminated plate theory. Familiarity with such analysis is assumed. Input consists of ply material properties, material strengths, ply fiber orientation and stacking sequence, mechanical loads and/or strains, and temperature and moisture loads. Output consists of apparent laminate material properties, ply stiffness and compliance matrices, laminate "ABD" matrices, laminate loads and mid-plane strains, ply stresses and strains in global and material axes, and load factors for ply failure based on Tsai-Hill, Hoffman, and Tsai-Wu failure theories.

Download Here

TOLPASS Software for ISO Fits
Hexagon	Browse Related Books and Standards ISO 286
Version:
Release Date:
File Size:	322K
License:	Demo
Limitations:
Minimum Requirements:	Windows 95/98/NT
Description: The TOLPASS Software is used by the designer for dimensioning of ISO fits to ISO/R 286. After input of nominal diameter, tolerance class and quality, TOLPASS calculates all tolerances a