This item is not available for sale.

We Recommend

 

About This Item

 

Full Description

This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of supporting material that is not representative of the intended installation; B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melt and drip, or otherwise disintegrate and continue to burn on the floor of the test chamber; C Materials that are designed for use in a relatively horizontal position with only its top surface exposed to air; or D Thermoplastic materials.
 

Document History

  1. CAN/ULC S102.2-10


    Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies

    • Most Recent
  2. CAN/ULC S102.2-07

    👀currently
    viewing


    Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies

    • Historical Version
  3. CAN/ULC S102.2-03


    Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies

    • Historical Version