Language: English
    • Available Formats
    • Options
    • Availability
    • Priced From ( in USD )
    • Printed Edition
    • Ships in 24-48 hours
    • $57.60
    • Add to Cart

We Recommend

 

About This Item

 

Full Description

1.1 This test method covers the determination of the resistance to fracture of metallic materials under Mode I loading at static rates using any of the following notched and precracked specimens: the middle-cracked tension M(T) specimen, the compact tension C(T) specimen, or the crack-line-wedge-loaded C(W) specimen. A K-R curve is a continuous record of toughness development (resistance to crack extension) in terms of KR plotted against crack extension in the specimen as a crack is driven under an increasing stress intensity factor, K.

1.2 Materials that can be tested for K-R curve development are not limited by strength, thickness, or toughness, so long as specimens are of sufficient size to remain predominantly elastic to the effective crack extension value of interest.

1.3 Specimens of standard proportions are required, but size is variable, to be adjusted for yield strength and toughness of the materials.

1.4 Only three of the many possible specimen types that could be used to develop K-R curves are covered in this method.

1.5 The test is applicable to conditions where a material exhibits slow, stable crack extension under increasing crack driving force, which may exist in relatively tough materials under plane stress crack tip conditions.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 

Document History

  1. ASTM E561-10e2


    Standard Test Method for <emph type="bdit">K-R</emph> Curve Determination

    • Most Recent
  2. ASTM E561-10e1


    Standard Test Method for K-R Curve Determination

    • Historical Version
  3. ASTM E561-10


    Standard Test Method for K-R Curve Determination

    • Historical Version
  4. ASTM E561-08e1


    Standard Test Method forK-R Curve Determination

    • Historical Version
  5. ASTM E561-08


    Standard Test Method forK-R Curve Determination

    • Historical Version
  6. ASTM E561-05e1


    Standard Test Method forK-R Curve Determination

    • Historical Version
  7. ASTM E561-05

    👀currently
    viewing


    Standard Test Method for K-R Curve Determination

    • Historical Version
  8. ASTM E561-98


    Standard Practice for R-Curve Determination

    • Historical Version