BS EN 10025-3:2004, in addition to part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the normalized/normalized rolled delivery condition in the grades and qualities given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) in thickness less than or equal to 250 mm for grades S275, S355 and S420 and in thickness less than or equal to 200 mm for grade S460.

In addition to EN 10025-1:2004 the steels specified in this document are especially intended for use in heavily loaded parts of welded structures such as, bridges, flood gates, storages tanks, water supply tanks, etc., for service at ambient and low temperatures.



Cross References:
EN 1011-2
EN 10020
EN 10025-1:2004
EN 10027-1
EN 10027-2
EN 10163-1
EN 10163-2
EN 10163-3
EN 10164
EN 10221
CR 10260
EN 10017
EN 10024
EN 10029
EN 10034
EN 10048
EN 10051
EN 10055
EN 10056-1
EN 10056-2
EN 10058
EN 10059
EN 10060
EN 10061
EN 10067
EN 10162
EN 10279
EN 10160
EN 10306
EN 10308
EN ISO 643
ISO 643:2003
EN ISO 1461
ISO 1461:1999
EN ISO 14713
ISO 14713:1999
ECSC IC 2:1983